Skip to content

How to Fix QuickBooks Error 6143

    Numerous issues can occur while using QuickBooks Desktop’s various functions if the company files for the software are corrupt. QuickBooks Error 6143 is an example of a problem that occurs as a result of errors in the company file. The company file may need to be repaired using advanced file repair tools if simple troubleshooting is ineffective in some cases to resolve error-related company file problems. Although the QuickBooks verify and rebuild data tool fixes company file damage, the main issue is that it also causes problem 6143. You will also discover a thorough troubleshooting procedure in this post, along with a list of all the causes of QuickBooks Error 6143. Continue reading the article all the way through for comprehensive information.

    Introduction: QuickBooks Error 6143

    When accessing the company file or using it for any other purpose, such as running the QuickBooks verify/rebuild data tool, Error 6143 in QuickBooks may arise. The company file has been damaged, which is the major cause of QuickBooks Desktop error 6143. Additionally, it can be present if there are any blank spaces before the file extension in the corporate file name. Other causes of error 6143 in QuickBooks desktop include an out-of-date version of the software or an inaccessible company file.

    Possible Reasons Behind the Occurrence of QuickBooks Error 6143

    Any of the following reasons could lead to the QuickBooks error code 6143:

    ▶ Incomplete installation of QuickBooks Desktop.
    ▶ Damage to Windows system files is one of the likely causes of the error: The company file error may be caused by entries that are corrupted or removed from 6143 Windows system files.
    ▶ This error could be brought on by a harmful virus or malware infection.
    ▶ Your work-flow may be impeded by an error if any of your hardware or applications were improperly installed.
    ▶ Error 6143 in QuickBooks might occur when a necessary document or piece of information is missing.

    Solutions to Resolve the QuickBooks Error 6143

    You can easily fix the error code 6143 by implementing the enumerated methods discussed in the article. Let’s start executing one by one:

    Total Time: 30 minutes

    Open a Sample Company Files Locally Installed on a Workstation

    You’re required to open a locally installed sample company file on the workstation as your first procedure. It is possible to determine whether the problem is related to the company file by opening the sample company file. If the sample company file fails to open and instead displays an error message, the QuickBooks installation is likely corrupted.

    The actions to be taken are as follows:-
    ➤ In the No company open window, click Open a sample file as the first option
    ➤ Choose a sample company file from the list
    ➤ If the sample file displays the same problem notice, then repairing the QuickBooks installation is necessary.

    Terminate all the QuickBooks Processes

    Another approach is to close all the QuickBooks related processes.

    The following steps should be taken when using this method:
    ➤ Login as an administrator in your very first step
    ➤ Next, activate the Task Manager by pressing the Ctrl, Shift, and Esc keys altogether from your keyboard
    ➤ Select the users tab to display processes for all users after done with the above step
    ➤ By selecting the End Task option, all tasks connected to QuickBooks can be closed.

    MeConfigure Antivirus Software and Firewall Ports

    You may see QuickBooks error 6143 if the antivirus and firewall software blocks access to particular QuickBooks programs or files. Additionally, you might try configuring the firewall ports and creating an exception for the QuickBooks software.

    Open the Company Files Locally

    You can check if there is a problem with the location of the company file by opening the company file locally. If the file opens while it is still saved to the desktop, it is likely that the location is broken. If you have changed the location of the file and it still won’t open, the file may be damaged.

    Here is a detailed explanation of the steps to take in order to open the company file locally:
    ➤ Start by launching the folder that contains the company file
    ➤ Afterward, look for files with the QuickBooks extension
    ➤ After finding the file, select it using the right click
    ➤ After that, select Copy and then go to the desktop
    ➤ Right-click now while holding down the Control key and choosing Paste
    ➤ Open QuickBooks once you have successfully copied the file to your desktop
    ➤ Moving on, you must go to the window with no company open
    ➤ Select Open or Restore an Existing Company as well
    Close all of the QuickBooks processes at the end.

    Rename the .ND and .TLG Files

    The QuickBooks error number 6143 may occasionally be fixed by renaming the damaged .ND and .TLG files. The files are made inaccessible to QuickBooks by renaming them. As a last option, QuickBooks will create a new one the very next time you start the QuickBooks software.

    The steps listed below should be followed to rename the files:-
    ➤ Enter the directory where your company’s files are located
    ➤ Choose the file that has both a .ND and .TLG extension
    ➤ Perform a right-click on them and select the “Rename” option
    ➤ To finish up the files, add .old followed by pressing the Enter key
    Restart your computer and see if the error code 6143 reappears.

    ➤ On each network workstation and server, log out and close QuickBooks
    ➤ The QuickBooks company file is saved in the server’s installation folder for QuickBooks
    ➤ The file is typically found at C:\Users \Public\ Public Documents\ Intuit\QuickBooks\ Company Files
    ➤ Rename can be chosen by right-clicking the company file
    ➤ Now eliminate all spaces from the company file extension and name
    ➤ Open QuickBooks and carry out the action that first caused the error.

    For Free Consultation With QuickBooks Experts: Just Call or Chat with US

    Conclusion!

    Well, dealing with data damage in QuickBooks is a serious problem. When a company file problem occurs, you can worry about the important information that the company file contains. Hopefully, the above discussed information will be very helpful in rectifying the QuickBooks error 6143. In any case, the error code is still appearing on your screen, you can feel free to reach out to our Team of Experts via QuickBooks Helpdesk Team.


    ☛ FAQs

    How Do I Detect if the QuickBooks Error 6143 Lies Within the Program or the Company File?

    You must determine whether the QuickBooks application or company file is inaccurate. Open a sample file on your workstation to complete this task.
    ✔ Select Open a Sample File from the No Company Open Window by reaching out to it.
    ✔ And then select a sample file to open from the list.

    Can Copying of the Company File to the Workstation Resolve the QuickBooks Error 6143?

    Yes, it can help you to some extent if there is a problem with your company file and in that case, you can move your copy of the company to a removable storage device.

    To do so:
    ✔ Connect the USB drive to the computer where the problem is occurring.
    ✔ Open QuickBooks after pasting the company file into the program.
    Now access the firm file from the computer’s local storage.

    How Does the QuickBooks File Doctor Tool Assist you in Rectifying QuickBooks Error 6143?

    With downloading and running QuickBooks File Doctor, you can clear common file damage and network issues. Apart from that, it can fix the damaged company file or network using the QuickBooks File Doctor.

    Here’s how:
    ✔ Select Company File Issues in the tool hub
    ✔ Choose Run QuickBooks File Doctor
    ✔ The file doctor’s opening time is up to a minute
    ✔ If the QuickBooks File Doctor won’t open, look for the QuickBooks Desktop File Doctor and manually open it
    ✔ Choose your company file in QuickBooks File Doctor from the drop-down menu
    ✔ Select Browse and search to look for your file if it isn’t visible
    ✔ Select Check your file (just the middle option), and then press Next
    ✔ After entering your QuickBooks admin password, click the Next button.
    Your file size will affect how long the scan takes. Most of the time, it can take up to five minutes. Open QuickBooks and your company file after the scan is complete.

    Leave a Reply

    Your email address will not be published.

    error: Content is protected !!
    Phone

    +1347-967-4079