Skip to content

How to Fix Sage 50 Error 1921

    You might be getting all the benefits from your Sage 50 accounting software. However, at times you can get stuck with some errors either by installing or uninstalling Sage 50. And one such error is Sage Error 1921.

    Sometimes, when attempting to uninstall National Instruments software while the application is still operating, Error 1921 may appear.

    What is Sage Error 1921?

    Error 1921 could show up if you try to remove National Instruments program while the program is still open. One of the installation issues that consumers see is the Sage error 1921. This type of error will display the following message on your computer screen: Error 1921: Service Sage Data Service could not be stopped.

    What are the Causes Behind Sage Error 1921?

    Here are all the causes that might cause Sage Error 1921 to occur:
    💠 You must thus make sure that this accounting application is compatible with the operating system on your computer.
    💠 When you are trying to uninstall Sage software, the National Instruments program is running in the background.
    💠 When you try to install Sage software on an unsupported operating system, this error can occur.
    💠 Check your access rights before shutting off system services.
    💠 Before installing the programs on your system, you must adhere to the instructions because of this.

    Resolutions to Fix Sage Error 1921?

    Resolving Sage Error 1921 is not at all difficult, here given below are all the possible resolutions you can follow step by step to resolve this error easily.

    Total Time: 30 minutes

    Disabling Sage Data Service

    If you are stuck with this error then you shouldn’t be concerned since the actions listed below will definitely help you to fix the error.
    ✅ The first step is to press the Windows key on your keyboard, followed by the R key.
    ✅ Now the next step is to write services.MSC.
    ✅ After that, you can click the OK button at the bottom of the active window.
    ✅ To close the window, simply click on the same.
    ✅ Once done, try to find Sage Data Service after that, then right-click on it.
    ✅ Properties will then show up as an option.
    ✅ Now you must select the same.
    ✅ Go to Startup after that, and then choose Disabled from the Type drop-down selection.
    ✅ After that, you must click OK.
    ✅ After making the modifications, just close the Services window.
    ✅ Once done, restart your computer.
    ✅ Finally, you try to reinstall the software application.
     
    Note:
    💠 Make sure you press both the keys simultaneously.
    After making changes to the settings of any software program installed on your computer, you should always restart your system.

    Disabling National Instruments Administration

    Disabling National Instruments Administration can help you to fix this error. Follow these steps mentioned below to disable National Instruments Administration for:
     
    For Windows 8/8.1/10:
     
    For Windows 8/8.1/10, follow these steps:
    ✅ First, you need to start Task Manager.
    ✅ Now choose the Startup tab.
    ✅ After that, disable every single National Instrument administration by performing a right-click.
    ✅ Then you need to close the Task Manager.
    ✅ After that, Restart the computer.
    ✅ You can attempt the installation again when the framework has resumed.
    ✅ Finally, when the installation is complete, you may activate all of the National Instrument features by repeating the previous steps and beginning over.
    Run Sage 50 on Microsoft windows 8 1
     
    For Windows 7:
     
    For Windows 7, follow these steps:
    ✅ First, go to the Start Menu.
    ✅ Now you need to enter MSConfig.
    ✅ Then, click on Enter.
    ✅ After that click the Startup tab.
    ✅ After that disabled, the National Instrument administrations
    ✅ Now choose OK.
    Finally, you need to restart your computer.

    Sage 50 Installation Issues with Windows 11

    Resolution 3: Go to Microsoft’s official website

    To fix this error using  Microsoft’s official website, follow these steps:
    ✅ First, you need to select Microsoft’s official website.
    ✅ After that look for the installation of the Microsoft.NET Framework.
    ✅ Once you’ve chosen your language, click the Download option.
    ✅ Now double-click the downloaded file in your Downloads folder when the download is finished.
    ✅ After that, follow the on-screen steps to install the most recent.NET Framework update.
    Finally, check to check whether the error has been fixed by reopening TurboTax.

    For Free Consultation With Sage 50 Experts: Just Call or Chat with US

    Take Away

    If you try to uninstall National Instruments software while the program is running, Error 1921 can appear. The Sage error 1921 is one of the installation errors that you may experience. If you still see this error after terminating all NI programming applications, you can shut down the service that is mentioned in the error message.

    Now that you have a complete guide on Sage Error 1921, you can easily resolve this error. However, if you are still stuck or have any queries then you can reach out to the customer helpdesk for quick and easy assistance ✍.


    A Frequently Asked Questions

    How to Reinstall Sage 50, to Successfully Resolve Sage Error 1921?

    To reinstall Sage 50, follow these steps:
    💠 In Windows 10, choose Programs and Features / Apps and Features by performing a right-click on the Start menu.
    💠 After that, choose your Sage 50 version from the list.
    💠 To uninstall, click.
    💠 Reinstall: Follow the instructions below and download from Sage 50 Product and Payroll Updates.

    How Do You Restart Your Computer, Which is Required to Fix Sage Error 1921?

    Yes, you must restart your computer to fix Sage error 1921. Follow these steps to achieve this:
    💠 Start by entering a search term in the box on the bottom right.
    💠 After that, click the power icon.
    💠 Finally, select Restart or Shutdown.

    What is the Other Solution to Fix Sage Error 1921?

    You can follow the steps mentioned below to resolve this error:
    💠 Use the first five actions listed above in Disabling Sage Data Service to reopen the Service’s Properties window.
    💠 Now select the Browse button on the right after clicking the Log On tab.
    💠 In the final section, type the name of your machine, then click Check Names to verify the name.
    💠 If prompted, choose OK and enter your administrator password.
    💠 Finally, to close the window, click OK.

    Leave a Reply

    Your email address will not be published.

    error: Content is protected !!
    Phone

    +1347-967-4079