Skip to content

How to Fix Sage 50 Error 1639?

    Sage 50 Error Code 1639

    Sage 50 Error 1639 happens whena programwithin Sage 50 fails or crashes while it isrunning. It doesn’t always mean that the code was corrupt, but simply that it did not work during its run-time. This kind of a Runtime error may seem annoying unless handled and corrected.

    In this post, we are going to talk about the symptoms, causes, and solutions to Sage 50 Error 1639 in detail so continue reading.

    Symptoms of Sage 50 Error Code 1639

    Runtime errors happen without warning. The error message can come up the screen anytime Sage 50 software is being used. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

    There may be instances of file deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. Users may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

    Causes of Sage 50 Error 1639

    During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

    Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problems, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

    Related-: Sage Error Code 1608

    Steps for Fix Sage 50 Error 1639

    Sage 1639 Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are various ways to do it.

    Total Time: 35 minutes

    Close Conflicting Programs

    When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.Β 

    πŸ’  Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
    πŸ’  Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process button.
    πŸ’  You will need to observe if the error message will recur each time you stop a process.
    πŸ’  Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

    Update / Reinstall Conflicting Programs

    Using Control Panel

    πŸ’  For Windows 7, click the Start Button, then click Control panel, then Uninstall a Sage 50 program
    πŸ’  For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
    πŸ’  For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
    πŸ’  Once inside Programs and Features, click the problem program and click Update or Uninstall.
    πŸ’  If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application’s installation disk to reinstall the Sage 50 program.

    Using Other Methods

    πŸ’  For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appears on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
    πŸ’  For Windows 10, you may click Start, then Settings, then choose Apps.
    πŸ’  Scroll down to see the list of Apps and features installed in your computer.
    πŸ’  Click the Program which is causing the runtime error, then you may choose to uninstall or click advanced options to reset the application.

    Update your Virus Protection Program or Download and Install the Latest Windows Update

    Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

    Re-install Runtime Libraries

    You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

    πŸ’  Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
    πŸ’  Click Uninstall on top of the list, and when it is done, reboot your computer.
    πŸ’  Download the latest redistributable package from Microsoft then install it.

    Run Disk Cleanup

    You might also be experiencing runtime error because of a very low free space on your computer.Β 

    πŸ’  You should consider backing up your files and freeing up space on your hard drive
    πŸ’  You can also clear your cache and reboot your computer
    πŸ’  You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )Β 
    πŸ’  Click Properties and then click Disk Cleanup

    Read Also-: Sage Error Code 1304

    Reinstall Your Graphics Driver

    If the error is related to a bad graphics driver, then you may do the following:

    πŸ’  Open your Device Manager, locate the graphics driver
    πŸ’  Right click the video card driver then click uninstall, then restart your computerΒ 

    IE Related Runtime Error

    If the error you are getting is related to the Internet Explorer, you may do the following:

    πŸ’  Reset your browser.
    πŸ’  Disable script debugging and error notifications.
    πŸ’  On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
    πŸ’  Put a check mark on the radio button
    πŸ’  At the same time, uncheck the “Display a Notification about every Script Error” item and then click Apply and OK, then reboot your computer.

    Final Words

    We hope that the above mentioned solution helps you resolve the Sage 50 Error 1639. However, if you still face issues, please feel free to call us or connect via email at[email protected] and one of our expert Sage professionals will guide you through the troubleshooting.

    πŸ‘‰ Frequently Asked Questions

    Q 1. What Prompt Would I See On My Screen During A Sage 50 Error 1639?

    Ans : You will see the following error:
    πŸ’  Error Information
    πŸ’  Error name: Peachtree 2010 Error 1639
    πŸ’  Error number: Error 1639
    πŸ’  Description: Error 1639: Peachtree Complete Accounting has encountered a problem and needs to close. We are sorry for the inconvenience.
    πŸ’  Software: Peachtree Complete Accounting
    πŸ’  Developer: Sage Software, Inc.

    Q 2. How Can I Reset My Browser?

    Ans : Step to reset my browser :

    πŸ’  For Windows 7, you may click Start, go to the Control Panel, then click Internet Options on the left side. Then you can click the Advanced tab then click the Reset button.
    πŸ’  For Windows 8 and 10, you may click search and type Internet Options, then go to the Advanced tab and click Reset.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    2 × 1 =