Sage 50 is a software which provides streamlined solution to the business. It is an in house accounting platform which determines all the financials of the organization. There are features of Sage 50 which makes the software a benchmark of performance. However, Sage 50 is prone to errors when the specifications are not met by the workstation. Errors can also arise due to networking, connections and security permissions.
Causes of Sage 50 Error 1053
Sage 50 Error 1053 is visualized when we start connection manager and it prompts.
Cause : The connection manager could not start because of the rights permissions not enabled or there is not license agreement acceptance of the connection manager.
Steps for Fix Sage 50 Error 1053
Total Time: 35 minutes
Correct the Connection Manager Setting
🔷 Select Control Panel > Administrative tools > Services
🔷 Right Select the Connection Manager > Properties > log on tab
🔷 Click Apply
🔷 In the General tab click start and restart
🔷 Quit services
🔷 You can start the Connection manager (in case the problem still arise, you can revert to local system, it might start without showing up any error)
Restart DHCP Network Management Protocol
🔷 In Control Panel select Administrative tools followed by services
🔷 Look for DHCP client
🔷 Right select Stop
🔷 Look for Sage 50 Database Connection Manager, right click and tap start
🔷 Again look for DHCP client
🔷 Right select DHCP and click start
🔷 Open Sage 50
Check the Cable of Ethernet
Just pull out the cable of Ethernet from the workstation and start connection manager from control panel > administrative tools > services. Once the manager starts plug in the cable back into the workstation and continue with the software.
Final Words :
Sage 50 is one of the most important accounting software to be utilized in the business to manage the different sectors in a set procedure. However, some errors might disturb the functioning of the software. In case you’re unable to fix the issues from the above solutions you can contact our sage Experts team who would assist you with the best in class service with 24/7 availability. You can also chat live with our customer chat support department.
👉Frequently Asked Questions
Q 1. What is Another Way of Resolving Sage 50 Error 1053?
Ans : You may also try disconnecting your workstation’s Ethernet wire.
Then use the connection manager, by going to:
▪ Start then Control Panel, Administrative Tools and finally go to Services.
▪ After the connection manager has started, you can plug the cable back into the workstation.
Q 2. What is a DHCP Client, and Why do I need one?
Ans : The primary purpose of DHCP is to eliminate the need to locate and issue IP addresses, domain name server addresses, and default gateway addresses. For effective communication, it is also necessary to handle multiple IP addresses on networks.
Q 3. What do you do if your Startup Program is Making an Issue?
Ans : If you startup program is making an issue follow these steps:
Return to Run and type, then hit Enter.
Check the Startup tab for any suspected programmes that could be related to the problem.
Then disable them to see what happens.