Skip to content

Sage 50 Update Could Not be Completed And Needs to be Run Again

    Sage 50 Update Could Not be Completed

    Are you also facing the error β€œSage 50 update could not be completed and needs to be run again”? Then you must identify the reason for this cause. As it won’t allow you to work further in your Sage 50 account. So, you have to fix it soon. Go through the list of reasons and then apply the solutions accordingly to resolve the problem and get back to your work. Below are the reasons and solutions that you have to check and then implement.

    Reasons for Sage 50 Update Could Not be Completed and Needs to Be Run Again Error

    The causes that you must know about to apply the solution for fixing the Sage 50 update error. The reasons for the cause are as follows:-

    • The settings of the User Account Control (UAC) is not correct
    • Antivirus blocks the Sage to run properly
    • The local path and server path is not the same
    • In your system, the Peachupd.exe file is running as the process
    • You have to run the files as an administrator
    • The PeachWLog.xml file fails to start
    • Few files are not updated properly when you update the software that is causing this issue.

    Steps for Fix Sage 50 Update Could Not be Completed and Needs to be Run Again Error

    In order to fix the issues that occur while downloading the updates, you need to understand the following steps, which include:

    Total Time: 30 minutes

    Ensure That the Data Path Matches With the Local Data Path on the Server

    πŸ’  Check the data path on the server
    πŸ’  Verify the location of data path with the local data path
    πŸ’  If they do not match with each other, then you need to uninstall the application and reinstall to a different program and data path.

    Restart Your Computer

    πŸ’  Restart your computer
    πŸ’  After starting it, run the update

    Run as Administrator

    πŸ’  Do not restart your PC
    πŸ’  Go to your data path and check the update folder
    πŸ’  Now, right-click executable files and selects run as administrator.
    πŸ’  After this, ensure that the updates are now installed in your PC

    Verify the Task Manager To See Whether Peachw.exe And Peachupd.exe Are Still Running In Processes

    πŸ’  Right-click on the task-bar and select the Task Manager option or you can press Ctrl+Shift+Esc keys to start the task manager
    πŸ’  After this, select Processes Tab. If you are using Windows 8, 8.1 or 10 version, you need to select Details Tab.
    πŸ’  You will see peachw.exe and Peachupd.exe are still running in processes, then select end process to end the task.
    πŸ’  Verify Service Release (SR) updates can be installed.

    Update Missing Status Data

    πŸ’  Browse to the data path and verify the date of STATUS.DAT file.
    πŸ’  Ensure that the date on the file is not older than a year or invalid future date.
    πŸ’  Right-click on the file and change the date
    πŸ’  Now select RENAME option and change the name of the file to STATUS.OLD
    πŸ’  If the STATUS.PTL is still present, repeat step second and third step.
    πŸ’  After this, browse the attachment sections and download file
    πŸ’  Now, double-click on the file and select the option Extract All.
    πŸ’  Extract the file to the data path and verify service release (SR) updates.

    Boot in Selective Startup

    πŸ’  Click on Windows +R keys
    πŸ’  Type msconfig in the open field and then press OK.
    πŸ’  Click on the General tab in the system configuration window and then choose β€˜Selective Startup’
    πŸ’  Clear Load Startup Items checkbox from the Selective startup option

    Download a New Copy of the Service Release

    πŸ’  Browse the data path and double click on the updates folder
    πŸ’  After you receive service release update file by clicking right cursor, select Delete option
    πŸ’  Download a new copy of the update
    πŸ’  After downloading the file, double-click on the downloaded file and begin the πŸ’  Service Release installation.
    πŸ’  If still the issue remains unresolved, proceed to the next section.

    Check the PeachWLog.XML File That Can Be the Causes of Failure

    πŸ’  Browse C:\Windows
    πŸ’  Open PeachWLog.XML file in the Notepad
    πŸ’  Select Edit option and Find.
    πŸ’  Search for fail in the file and folder that causes failure.
    πŸ’  The file causing the problem is status.dat
    πŸ’  Rename the file or folder name in the listed step number 5 and download a replacement file and place in the same location.
    πŸ’  In case the files which are to be replaced is not attached, delete all program path files, and run Repair on the Sage 50 program.
    πŸ’  Now, install Service Release updates.

    Overhaul the Program

    πŸ’  Go to Start option and click on the Control Panel
    πŸ’  Now, select Programs and Features option
    πŸ’  On reaching the program list, select Sage 50 Accounting and then click on β€˜Change’ key.
    πŸ’  Select β€˜Repair’ option and click β€˜Next’ key to start the repairing process.

    Remove Service Release (SR) Executable File

    πŸ’  Download WinRAR and install it in your PC
    πŸ’  Press right-click on Service Release executable file
    πŸ’  Select Extract to and add [file name].
    πŸ’  Open the extracted folder and press Run setup.exe.
    πŸ’  If you continue to receive errors, reboot your system in safe mode with networking and Run setup.exe.

    Uninstall and Reinstall Sage Application

    πŸ’  After the process is completed, download Sage.
    πŸ’  The latest downloaded file consists of latest service release applied.

    Note: If you are not able to uninstall to reinstall the program because you received a message saying that it was not found or already installed, then follow underlying steps

    πŸ’  Run Microsoft Easy Fix Utility
    πŸ’  Uninstall the program via command prompt. Once the file is successfully uninstalled, close the window
    πŸ’  Reinstall Sage again.

    Deactivate Anti-Virus Scanning

    πŸ’  Disable the real-time scanning of the anti-virus
    πŸ’  Ensure that the Sage application is updated successfully.

    Sage 50 Update Could Not Be Completed And Needs To be Run Again

    Final Words :

    All the solutions are mentioned to fix the Sage 50 update could not be completed and needs to be run again. You just have to identify the reason and then apply the solution step by step according to the reason. The solution is verified and checked by the team and then provided to you to help you out. In case you have to connect with experts then you have to connect with the Sage helpdesk team. Just give a call and get all the solutions and answers to your glitches. They are available all around the clock.